Lace Zipper Square Pouch tutorial



Things you will need

Cotton Fabric a lining and an outer fabric

For this tutorial i chose this unicorn print and a plain lining, this print is from Joann Fabrics

I also used medium OR light weight interfacing, the interfacing will add structure to the bag as the cotton is too flimsy and will lay flat otherwise

i used Grosgrain ribbon for the ribbon accents on the sides of the bag

Fabric – 8″x12″ 2 in main fabric, 2 in lining fabric

Zipper – 8-9″ in length

Interfacing Cut 2 at 8 x 12″

**FINISHED PRODUCT MEASURES 5 1/2″ X 5 1/2″ X 2 1/2″ tall

My Fabric is direction so i will be placing the fabric in the opposite ways so that it appears right side up on the bag

First take main fabric and lining fabric and place right sides together, do this for the other two pieces

Sew along the one side (8″ side) at the top of your fabric if its direction

flip right sides out and press that seam

do that for the other side

you will then sew this zipper on top, do one side at a time placing the zipper along the edge of the sew side of your fabric, make sure your fabric doesnt get too close to the teeth of the zipper on the underside so it doesn’t end up catching in the teeth once the bag is complete

use a matching thread so it will be invisible to the naked eye, in my machine i put a pink thread on the top of my machine and kept a white thread on my bobbin, the pink will be on top and the white will be underneath

once you are done sewing on y our zipper put ride sides together, main fabric right sides together with itself and the lining right sides together

we will be sewing down each side, in this photo i will be sewing the left side and the right side

Once done you will be able to unzip your zipper and open it up and put it right sides out, but then we will put it inside out and flatten it like shown, make sure the zipper and the bottom seam are lined up

we will then insert our 2″ piece of ribbon, you might need to unzip your zipper to get the pull out of the way, use pins or clips to keep it all together as it can be tricky to hole it all in place

fold the  ribbon in half and insert between the seam and the zipper, make sure the raw edges of the ribbon are lined up with the raw edges of the bag, sew along each side of your bag

**the raw edges will be exposed and that is fine at this point

Now we will cut notches into all 4 sides of the bag, i measured a 1 1/4″ by 1 1/4″ square and cut it out, the depth of your bag is depending on this measurement

my bag is 2 1/2″ high, whatever your measurement of  your square is multiply that by 2 and that will be the height of your bag

After you cut your notches you will grab some bias tape or 1 to 1 1/2″ ribbon and cover up those raw edges, you will do this again with the next step so keep that bias tape handy

After you are done covering the sides with bias take u will then flatten each of your cuts taking the side seams and lining it up with the middle of that cut, basically take your cut open it and squish it the opposite way, line up all the fabric making sure your lining and main body fabric is all lined up together

Do this for all 4 sides, once you have sewn all 4 sides, and covered with bias tape you will carefully undo the zipper providing you gave yourself some room to access it hahah! flip it right sides out and poke the corners and your done!

 


Notebook Pen Holder Sewing Tutorial

Things you will need for this tutorial

Cotton or Canvas fabric

Elastic or Fold over elastic (FOE)

Notebook you wish to put the holder on (for sizing)

Cut 2 pieces the height of your book by 3″ (My book was a standard size 8 1/2 x 10 so my pieces measured 10″ x 3″, Cut a shorter piece half the length of your longer pieces also 3″ wide (my pieces measure 5″ x 3″)

The short piece is the front of the slip pocket

Cut your elastic 1″ less the length of your longer pieces (my elastic would be 9″ in length since my larger pieces of fabric were 10″)

Take the shorter piece of fabric and  fold down the short end 1/4″ – Iron to hold it in place, sew about 1″ away from the edge to create a hem

Lay the longer piece of fabric down with the right side facing up, place the elastic on top (if its a pretty elastic or has a shiny side have that side facing up) Place the elastic down with one edge of the elastic along the left side of the first piece of fabric, lay the pocket piece ontop with the wrong side facing up

This is a better view for you

place the last piece of fabric on top with the right side facing down

Sew along 3 edges leaving the one end open for turning

Flip the piece right side out and then sew down the middle of the fabric which will create 2 spots for 2 pens

Fold in the edges of the hole and slip the elastic in and sew the hole closed with a top stitch, continue to top stitch the entire piece and then your done!

Make one for each book, your text books – Great way to keep a highlighter on hand for your studying and great for the minimalist in you who hates to have to much bulk and a billion pens when your walking to class!

Hope you enjoy and please Pin This and check out the video tutorial!

 

 

Save