Slice two of the piece of fabric in half as shown , this is where zipper will be placed
cut and iron fusible fleece to fit the heart 1/4″ smaller (this will help reduce the bulk in the edges of the heart
Using a hot iron press both sides, if you dont have fusible fleece a stabilizer material will work as well
place the top of the heart (main fabric) on your table right side facing up, place the zipper zipper side down onto the piece of fabric lining up the edges of the zipper with the bottom part of the heart piece, place the lining fabric ontop of the zipper right sides facing down. sew along the that edge as close to the zipper as you can get, if you have a zipper foot that would be the best option.
if you have difficulties placing the fabric please refer to my video tutorial linked below
once you finished sewing the zipper on fold the two pieces of fabric back to expose the zipper and sew along the edge near the zipper about a 1/4″ away for a nice top stitch
now we will attach the bottom of the heart, laying down the main fabric and then the zipper portion (zipper down) and then lining right sides down, making sure the edges of the fabric all line up and the bottom of the hear lines up with the top of the heart on the sides. sew next to the zipper, sometimes its hard to get past the zip so if you sew a small portion of it and then take the piece of out of your machine to move the zip then you can get past it better.
flip open the fabric to expose the zipper and again top stitch 1/4″ away from the zipper
Note the zipperfoot is very handy and can butt up to the zipper
Now its time to attach the back of the heart!
keeping the sewn portion facing up, lay the main fabric heart down onto the sewn portion right sides down, then lay the lining fabric on top with the right side facing up.
slip in the loop on the right hand corner of the heart and pin in place.
FOR THE LOOPS AND WRISTLET STRAP TAKE THE STRIPS OF FABRIC FOLD IN EITHER SIDE 1/2″ AND PRESS, FOLD AGAIN AND PRESS
THE STRAP SHOULD BE 1/2″ WIDE IN THE END, SEW ALONG THE EDGE TO CREATE THE STRAP
OR IF YOU DONT HAVE PATIENCE FOR THAT! USE RIBBON :d
Sew all around the perimeter of the heart, once you have passed over the zipper (slowly) open it up half way and then continue on sewing the entire thing
once finished flip it right sides out
it takes a minute or two and a little bit of finessing but it should look like this!
now for some top stitching
very slow and steady when you go over your zipper! if its metal zip over the teeth!
and then your done! just in time for your valentines day dinner 😀 how adorable and it will fit a samsung s7 some money and a few small makeup items so thats a plus!
I took some thick cardboard and i cut a circle from jar lid, this one is about 6″ in diameter, cut a circle in the middle and a notch out of the side. If you don’t enjoy this method there are other devices out there that can help make pom poms but if your cheap like me a box will suffice
Wrap the yarn around the circle trying to keep it all ontop of each other so all the threads are of the same length, be sure not to wrap too tight as it will slowly bend the cardboard
When you have reached your desired amount, the less yarn the thinner, the more yarn the fuller Tie off the centre with wire, or very strong twine or yarn
Cut all the loops at theend of the cardboard circle and then pull it out of the ring
you can make pom poms out of any type of yarn, twine or even ribbon just experiment and have fun!
to fluff out your pom use loosely spun yarn such as charisma by loops and threads and use a fine tooth comb to brush it out,