Leather Baby Mocassins sewing tutorial

Download the Free pattern

Get the 0 – 4 year pattern here!

The video also gives you tips and tricks when sewing leather

I cut the fringe and sole out of Suede and the rest of the slipper is made out of recycled leather from an old coat

Place the fringe piece ontop of the toe piece and sew along the top of the rectangle and 1/2″ from that seam. This will create a casing for the elastic

Grab the 0 – 4 year pattern here!

Take the heel  fringe piece lay it right side down, lay the heel piece right side down on top with the edge 3/4″ down from the top of the fringe piece, fold the fringe piece over the raw edge of the heel piece and clip into place, sew along the fringe piece edge and this will create the elastic casing

So sorry i forgot to photograph the heel fringe part so please check out the video to see those instructions

To make things easier you can use some school glue for the next two parts or clips as to not puncture the leather

line up the centre of the heel piece with the centre of the  back of the sole, manipulate the leather to curve around the sole, sew along that edge at 1/4″ seam allowance


place the toe portion on lining up the centre of the toe piece at the top of the sole, make sure you are sewing all the pieces inside out, sew along that edge with a quarter of an inch seam allowance

Flip the  shoe right sides and prepare your elastic for insertion, i used a plastic needle and threaded a piece of thread through the needle and the elastic i found this made it easier to slip through the letter

Pull the elastic out and sew the raw edges together, put the elastic to your desired ankle size

my Elastic is about 6″ long 1/4″ thick

Using sharp scissors slip the leather with quarter of an inch fringe, you can do this part in any way you like of course 🙂



Easy towel Head Wrap

To use this towel you bend over with your head down and your hair hanging to the floor
place the button portion lining up with your spine on the back of your neck, with your fingers place the edge
of the towel along your hair line while pushing your wet hair into the towel, pinch the hair wrap at the centre
of your forehead and begin to twist 3 or 4 times while bringing the loop at the end of the tail over your head
to hook onto the button at the back of your head

For this project you will need a cheap towel or terry cloth, a 1 inch button and some cotton Cord

Grab the pattern over at Craftsy

Thank you to those who do purchase my patterns, all of this goes to help support my channel, purchase materials and bring you more and quality content



Easy No raw edges pillow case – sewing tutorial

This tutorial is for a simple pillow case, of course a pillow case is very simple if you know how to sew a straight stitch but i will show you how to make this pillow case without any raw edges

For this tutorial i am using two different cotton fabrics

Main fabric (mario) – 27″ x  19.5

Trim fabric (lime green) – 10″ x 19.5″

All the instructions for this pillow will be at www.youtube.com/charmedbyashley